Sewage backup cleanup in the GTA
Sewage and other heavily contaminated water is treated as Category 3 (black water). IICRC-certified Guardian Emergency Response extracts the water, removes porous materials that cannot be saved, cleans affected surfaces, dries the structure and documents the work for your insurer.
Why sewage is handled differently
Water that contains sewage, or floodwater that has passed through a drain or the ground, is not a routine clean-water leak. Porous materials that soaked it up — carpet, underpad, many ceiling tiles, and often wet drywall or insulation — are typically removed rather than dried in place. The goal is to get contaminated water and wet materials out of the building, then clean and dry what remains.
If you are unsure whether the water is clean or contaminated, treat it as contaminated until it can be assessed. See sewage backup vs a clean water leak.
Our sewage backup process
- Make it safe — confirm power is safe, limit access, and identify the likely source if it is still flowing.
- Extract — remove standing water with equipment suited to contaminated water.
- Remove what cannot be saved — lift affected porous finishes and dispose of them properly.
- Clean and treat — clean salvageable surfaces in the affected area.
- Dry and document — run monitored drying and keep photos and moisture notes for the claim file.
Until help arrives
- Keep people and pets out of the affected area.
- Do not use a household shop vacuum on sewage — it can spread contamination and is not designed for it.
- Avoid contact with the water. If you have been exposed, wash thoroughly.
- Photograph the scene from a dry, safe place, including the source if you can see it.
- Stop using affected drains and fixtures if the backup is still active.
Insurance notes
Sewer backup is often limited or sold as an optional endorsement on Ontario home policies. Coverage depends on your policy, not on the restoration method. Mitigation still matters: standing sewage causes more damage the longer it sits. For a general overview, read does insurance cover sewer backup in Ontario. We document the scene; your insurer decides the policy.
Related water losses
A clean supply-line break is a different job from a sewage backup, but both need prompt extraction and drying. If clean water has been sitting, or has picked up contaminants, it can be reclassified. Tell us exactly what happened when you call.
Should I wait for the adjuster before cleaning sewage?
Usually you should start mitigation as soon as it is safe, and keep thorough photos. Standing sewage causes further damage and contamination the longer it remains. Ask your insurer for guidance if you are unsure, but do not leave the water unattended.
Can carpet be dried after a sewage backup?
Usually not. Carpet, underpad and other porous materials that have been soaked with sewage are typically removed. Salvage depends on the material, how long it sat, and how far the water travelled. That decision is made on site.
Is a sewage backup a plumbing job or a restoration job?
Both. A plumber or the municipality deals with the blockage or the public sewer side. Restoration deals with the water and materials already in the building: extraction, removal, cleaning, drying and documentation.
Will it still smell after the water is gone?
Odour often lingers if wet or contaminated materials remain. Source removal and cleaning come first; odour treatment follows if needed. See odour removal.